Toshiba e-Studio 901 Operator's Manual page 72

Adding paper, Toner and Staples
C
Set the end fence.
To remove the end fence, slide it to the right.
5
D
Press the elevator switch on the multi bypass tray (Tray 7).
The green lamp of the elevator switch is blinking while the tray is going up
and down, and keeps lit when it stops.
Press the elevator switch to move down original table if you want to either
add paper or remove jammed ones.
Note
❒ The tray can hold up to 500 sheets.
❒ For details about using the multi bypass tray (Tray 7), see "Using the Multi
Bypass Tray (Tray 7)", Copy/Document Server Reference.
Reference
p.78 "Changing to a Size that is Not Automatically Detected"
66
ANQ068S
ANQ069S
APF030S