Toshiba e-Studio 901 Operator's Manual page 19

Problem
" Original is be-
ing scanned by
another function.
" ap-
Please wait.
pears.
" Cannot display
preview of this
page. " appears, and
you can not check the
thumbnail image.
Note
❒ If you cannot make copies as you want because of paper type, paper size, or
paper capacity problems, use recommended paper. See "Copy Paper", About
This Machine.
❒ Using curled paper often causes misfeeds, soiled paper edges, or slipped po-
sitions while performing staple or stack printing. When using curled paper,
take the stiffness out of the paper with your hands to straighten out the curl,
or load the paper up side down. Also, to prevent paper from curling, lay pa-
per on a flat surface, and do not lean it against the wall.
Cause
Copier or Scanner func-
tion is in use.
The image data may have
been corrupted.
When You Have Problems Operating the Machine
Solution
To cancel a job in progress, first press
[Exit], and then press the {Copy} key or
{Scanner} key. Next, press the {Stop}
key. When the message "
key was pressed. Stop copy-
ing appears? " press [Stop].
Pressing [Exit] displays the preview
screen without a thumbnail.
1
The Stop
13