Toshiba e-Studio 901 Operator's Manual page 58

Troubleshooting When Using the Scanner Function
Message
Exceeded max.
number of files
which can be used
in Document Serv-
er at the same
time.
Entered protec-
tion code for
destination is
incorrect. Please
re-enter.
Entered user code
4
is not correct.
Exceeded max.
number of alpha-
numeric charac-
ters.
Authentication
has failed.
The entered path
is not correct.
Please re-enter.
Captured file ex-
ceeded max. num-
ber of pages per
file. Cannot send
the scanned data.
Original is being
scanned by anoth-
er function.
Please wait.
[Copier][Document Server]...
E-mail address
entered is not
correct. Please
re-enter.
Memory is full.
Scanning has been
cancelled. Press
[Send] to send
the scanned data,
or press [Cancel]
to delete.
52
Cause
The maximum number of
files that can be stored in
the document server has
been exceeded.
The correct protect desti-
nation code was not en-
tered.
The entered user code is
incorrect.
The maximum enterable
number of alphanumeric
characters has been ex-
ceeded.
The entered login user
name or login password
is incorrect.
The entered path format
is incorrect.
The maximum number of
pages per file has been
exceeded.
The machine is using an-
other function such as
copying.
The entered e-mail ad-
dress is incorrect.
Because there is not
enough free hard disk
space in the machine for
delivering or sending by
e-mail while storing in
the Document Server,
only some of the pages
could be scanned.
Solution
Check the files stored by the other func-
tions, and then delete unneeded files.
See "Document Server", Copy/Docu-
ment Server Reference.
Make sure the protection code is cor-
rect, and then enter it again. See "Regis-
tering a Protection Code", General
Settings Guide.
Check the authentication setting, and
then specify a correct user code.
Make sure the maximum number of
characters which can be entered, and
then enter it again. See "Values of vari-
ous set items for transmission/storage
function", Scanner Reference.
Check the login user name and login
password. The machine is unable to au-
thenticate. Contact an administrator.
Confirm the destination computer and
the path, and then enter it again.
Reduce the number of pages in the
transmitted file, and then resend the
file. See "Storage function", Scanner
Reference.
Retry scanning after the operation with
the other function is completed.
Make sure the e-mail address is correct,
and then enter it again.
Specify whether to use the data or not.