Toshiba e-Studio 901 Operator's Manual page 22

When the Machine Does Not Operate As Wanted
*4
Stapling is not available.
*5
Simultaneous operation become possible after you press [New Job] key.
Note
❒ Stapling cannot be used at the same time for multiple functions.
1
❒ If the machine is capable of executing multiple functions simultaneously,
specify which function should have priority in "Print Priority". This setting is
factory-preset to "Display Mode". For setting of Printing Priority Function,
see "Print Priority", General Settings Guide.
❒ When Finisher or Booklet Finisher is installed on the machine, you can specify
the output tray where documents are delivered. See "Output tray settings",
General Settings Guide.
❒ Operation speed might be reduced if you scan originals while a print job is in
progress.
16