Toshiba e-Studio 901 Operator's Manual page 57

Message
Sender has not
been specified.
Exceeded max. E-
mail size. Send-
ing E-mail has
been cancelled.
Check [Max. E-
mail Size] in
Scanner Features.
Sending the data
has failed. The
data will be re-
sent later.
Transmission has
failed. To check
the current sta-
tus, press
[Scanned Files
Status].
Transmission has
failed. Insuffi-
cient memory in
the destination
hard disk. To
check the current
status, press
[Scanned Files
Status].
Output buffer is
full. Sending the
data has been
cancelled. Please
try again later.
Exceeded maximum
number of file to
store. Delete all
unnecessary
files.
Exceeded max.
number of stored
files. Cannot
send the scanned
data as capturing
files is unavail-
able.
Cause
The sender's name was
not specified.
The maximum e-mail size
has been exceeded.
A network error has oc-
curred and a file was not
sent correctly.
While a file was being
sent, a network error oc-
curred and the file could
not be sent correctly.
Transmission has failed.
There was not enough
free space on the hard
disk of the SMTP server,
FTP server, or client com-
puter at the destination.
The file being stored has
exceeded the max. num-
ber of pages for one file.
Too many files are wait-
ing to be delivered.
Too many files are wait-
ing to be delivered.
When a Message is Displayed
Solution
A sender's name should be specified
before sending e-mail. Send e-mail after
specifying the sender's name.
• Increase the size of [Max. E-mail Size].
• Set [Divide & Send E-mail] to [Yes (per
Page)] or [Yes (per Max. Size)].
See "Send Settings", General Settings
Guide.
Wait until sending is retried automati-
cally after the preset interval. If sending
fails again, contact the administrator.
Try the operation once more. If the mes-
sage is still shown, the network may be
crowded. Contact the administrator. If
multiple files were sent, use the
Scanned Files Status screen to check for
which file the problem occurred.
Allocate sufficient space.
Specify whether to use the data or not.
Scan the pages that were not scanned
and store them as a new file. See Storing
Files Using the Scanner Function Scan-
ner Reference.
Please try again after they have been
delivered.
Please try again after they have been
delivered.
4
51