Pc Interface - ESI IVX20 Installation Manual

Function 7: Reports IVX 20

PC interface

Use an RS-232C cable to connect a computer's serial port to the serial port of IVX 20.
When connected to IVX 20, the computer resets the baud rate for faster communications. Once
connected, the installer can:
• Program the system using the PC programming package, ESI Installer.
• Capture debug information.
• Update system software.
• Perform a back-up/restore of system configuration.
• Print DSS labels.
Note: Five minutes after exiting programming mode, the system will resume outputting
SMDR records.
J.2