Entering Alphanumeric Characters - ESI IVX20 Installation Manual

System programming: an introduction

Entering alphanumeric characters

You enter names for extensions and departments by pressing the dial pad key that corresponds to
the character to be entered. The key's possible entries will change each time the key is pressed,
and the display will show this. When the display shows the desired character, press # to confirm;
the cursor will move to the next character position. You may move the cursor left (to correct an en-
try) by pressing the left scroll key ( ) or move right (to add a space) by pressing the right scroll key
( ).
Example: To enter a B, press 2 twice (the possible options to scroll through are A, B, C and
2). When B is displayed, press # to confirm; the cursor will move to the next char-
acter to be entered. To complete the name, press # #.
C.2
Key Options
0 0, - (hyphen), _ (underline)
1 Q, Z, 1, "_" (space)
2 A, B, C, 2
3 D, E, F, 3
4 G, H, I, 4
5 J, K, L, 5
6 M, N, O, 6
7 P, R, S, 7
8 T, U, V, 8
9 W, X, Y, 9
Backs up and erases
(left
scroll key)
Adds a space
(right
scroll key)
[Enter]
#
# # Ends the name
IVX 20