Scooter Tiller Controls - Shoprider VIKING 3 Owner's Manual

(2 & 3) Speed Controls
The speed control allows you to control your speed up to maximum speed of 10kmph
Pushing down on the thumb lever (2) to increase or decrease your speed, to stop the
scooter remover your thumb from the lever for automatic braking. The "High / Medium /
Low" switch (3) can be used to drive the scooter at it maximum speed of 10kmph.
Please use extra caution when using the scooter in "High" mode.
NOTE: When attempting to climb slopes you will need to set the "High / Medium / Low"
switch in to the "High" setting.
NOTE: This scooter is fitted with slow when turning function so will slow down when the
handle bars are turned you cannot speed the scooter up when turning.
Electromagnetic Brake
The brake is automatically operated when the control levers are released. There is a slight
delay when the scooter decelerates; this allows the scooter to come to a smooth stop.
(4) Headlight
Sliding switch to turn on the LED headlight light ( ). To turn on high beam use ( )
button, the tail lights will come on when the headlights are on.
(5) Hazard Warning Switch
A red button operates all indicators flashing.
(6) Horn
A red button operates the horn.
(7) Forward or Reverse Controls
The thumb lever controls the speed and to operate the scooter in reverse – ensure the
scooter is at a standstill and press (7) and look at the LCD screen (D) to see the indicated
direction of travel. To change back to the forward direction ensure the scooter is at a
standstill and press (7) and look at the LCD screen (D) to see the indicated direction of
travel.
(8) On/Off Key Switch
Insert the key in the key barrel. Turn the key on and the LCD screen will indicate the battery
charge. There is a delay before the thumb lever control can be operated, while the
controller is checking the circuits.
(9) Indicator Switch
Slide the switch to the Right or Left indicator respectively. Returning the lever to centre
position to turn off the indicator
10