Tiller Controls - Shoprider Valencia User Manual

Tiller Controls

Speed Control (1)
The speed control enables you to set the maximum speed of the scooter. The tortoise being slow,
and the rabbit being the maximum.
Note:
Always start at a slow speed until accustomed with the characteristics of your scooter. Do
not put excessive pressure on the dial. Only turn as far as the stops.
When driving in pedestrian areas such as shopping precincts and busy pavement areas
always respect other pedestrians and turn the maximum speed down so that the scooter
travels at the walking pace of others around you.
Battery Level Indicator (2)
This gauge gives you a guide to the amount of charge left in the scooters batteries. This will give
the truest reading when the scooter is in motion.
Note:
Always fully charge the batteries before driving your scooter and never let the
batteries become completely drained, as this may cause permanent damage to
the batteries.
Thumb Lever Controls (3)
The thumb lever controls the reverse and forward motion of the scooter. Pressing the right lever will
drive the scooter forward, pushing the left lever will reverse the scooter. The amount of pressure
applied to the levers will determine the speed the scooter travels up to the maximum speed selected.
More pressure = more speed.
Release the thumb lever and the scooter will automatically come to a safe stop as the electromagnetic
brake is applied.
1
8
3
4
7
5
2
3
6
8