Scooter Tiller Controls - Shoprider 889SLBF Owner's Manual

SCOOTER TILLER CONTROLS

3
1
8
4
9
2
6
6
5
7
(1 & 2) Speed Controls
The speed control allows you to set a speed between 1 (minimum) and 10 (maximum).
Turn the dial knob counter-clockwise to "minimum" to decrease speed, and clockwise towards
"maximum" to increase your speed. The "High / Low" switch for extra speed. Please use extra
caution when using the scooter in "High" mode.
NOTE: When attempting to climb slopes, you will need to set the dial to "high" setting.
Remember the higher the number you set your speed dial to, the faster your scooter will travel.
(3) Battery Level Indicator
The number of LED bars lit, shows the amount of charge left in your batteries. The amount of
charge will only show at its true level when the scooter is in drive.
Caution – Do not allow the LED bars go out completely as complete discharge of the
batteries could cause irreversible damage.
(4) Lights
A blue colored button at the rear of the tiller operates the lights.
(5) Horn
A yellow button at the rear of the tiller operates the horn.
10