Components And Accessories - Microlife WatchBP office Instruction Manual

WatchBP Office and components
WatchBP Office blood
pressure device (1 pcs.)
WatchBP Office Software
CD X1
5
AC Adaptor X1 (Input:
100-240V~50/60Hz 0.7A
Output: +7.5V 2A)
M size (22cm~32cm) X2
L size (32cm~42cm) X2
Bluetooth Receiver
Driver
Install CD
Bluetooth receiver X1
Install CD X1
Quick start guide
How to take blood presssure measurement in three different modes
1 Plug cuff connector «1st VISIT» Mode (Double arm) e arm)
Press Start/Stop Press Start/Stop An averaged result will An averaged result will
in the cuff socket
button to begin a button to begin a be displayed after three be displayed after three
measurement measurement consecutive measurments consecutive measurments
«FOLLOW-UP» Mode (Single arm) gle arm)
2
Turn on the device
Simultaneous dual-arm
«AUSCULTATION» Mode
Place the stethoscope on Place the stethoscope on Press Start/Stop Press Start/Stop
(Single arm)
the hollow of the elbow, the hollow of the elbow, measurement and button to begin a button to begin a
over the brachial artery over the brachial artery measurement measurement
auscultatory function for
3 Switch the mode Note blood Note blood
presure using presure using
accurate in-offi ce blood
auscultatory auscultatory
method method
pressure measurement.
Instruction Manual
Flip over the quick start guide to see 'Product description'. tion'.
EN 1
Manual Instruction X1
Quick Start Guide X1