Operation; Turning On Printer Power; Performing A Self-Test - Printek Mt2 Operator's Manual

Operation

Turning On Printer Power

Once the battery is charged and the paper is loaded, the printer may be powered by pressing and releasing the
ON/OFF Button. When powered on, the printer's POWER INDICATOR will show the current state of the
battery charge. Green indicates that the battery is charged enough to continue printing for some period of time
(does not necessarily indicate a full charge). Amber indicates that the battery charge is low and the battery
needs to be recharged soon. Red indicates that the battery is not charged enough to continue printing.
Power/Battery Indicator
For information on the power operating modes of the printer, refer to "Power Settings – SW4" on page 13 in the
Printer Configuration section of this manual.

Performing A Self-Test

To perform a printer Self-Test, please use the following procedure.
ON/OFF and PAPER FEED Button Locations
7