Introduction; Printer Models And Key Features; Manual Contents - Printek MtP Series Programmer's Manual

This manual is intended to be used by software developers for the purpose of creating and/or modifying
applications to make use of the special features offered by the Printek MtP Series of mobile thermal printers.
This section of the manual describes the various models of printers and the features supported by this manual
and the information contained in other sections.
For printer set up and operating information for users, system integrators and information technology
personnel, please refer to the printer's Operator's Manual for the specific model of interest.
Printek's MtP Series of mobile thermal printers offers solutions for a wide variety of printing applications. The
various models support flexible paper widths, printing from roll stock or flat stock in easy loading cassettes,
label printing enhancements, and several host interface choices. The configuration options are shown below for
each model. For additional information, please refer to the printer's Operator's Manual or visit
www.printek.com.
Model Max Paper Size
MtP300 3.12" Wide Roll
MtP300 LP 3.12" Wide Roll
MtP400 4.125" Wide Roll
MtP400 LP 4.125" Wide Roll
MtP400 SL 4 x 6" Cassette
The remaining sections of this manual provide information on printer commands offered for the various
emulations as well as additional information helpful to programmers. Descriptions of each section are shown
below.
Selecting Emulations describes how to select the various printer emulations available in the MtP Series
printers.
Printek Emulation describes in detail the Printek commands available for controlling Printek MtP Series
printers.
Mt3 Emulation provides a summary of the command that are supported when emulating a Printek Mt3 printer.

Introduction

Printer Models and Key Features

Label Printing
Front Black Mark
Front/Back Black Mark, Gap
Front Black Mark
Front/Back Black Mark, Gap

Manual Contents

RS-232
Std
Std
Std
Std
n/a Std
Host Interfaces
IrDA Bluetooth Wi-Fi
Opt Opt Opt
Opt Opt Opt
Opt Opt Opt
Opt Opt Opt
Opt Opt Opt
1