Table of Contents
Advertisement
The description of every item is listed below:
Item
Split-screen mode
selector
Full screen
Camera Scan
Snapshot
EMAP
SKYROS iView supports from 1 to 64 cameras split views. The
video from IP camera will display in split screen display cells, and
you can view up to 64 IP cameras at the same time. Click the button
to select the number of IP cameras you wish to view on display.
If the number of IP cameras is less than the number of split screens,
unused display cell will be displayed blank to indicate it's not been
connected to any IP camera.
Click this button to display video from IP cameras in full screen
mode. All control buttons will be hidden, only IP camera's video will
be displayed. To leave full screen mode, press 'Esc' key on your
keyboard.
When you click this button, SKYROS iView will scan the camera for
the video display, and switch to next camera's video after few
seconds, and so on.
Take a snapshot of selected IP camera and save the picture on your
computer. When you click this button, the picture of IP camera
selected in 'camera index selection' dropdown menu will be saved.
Display the EMAP (Electronic map) image on camera view area,
which indicates the position and orientation in physical environment
of every IP camera. To set a picture as EMAP's background picture:
Right click on the EMAP display area, and you'll be prompted to
select a picture on your computer:
Select the file, and click 'Open' button to use the picture as
background picture. To add a camera, right click on the background
picture and select 'Add Camera...'
75
DG-SC8860VPI User Manual
Description
Advertisement
Table of Contents
