Digisol DG-SC8860VPI User Manual page 39

Mirror Check 'Vertical' or 'Horizontal' box to flip the image vertically or horizontally,
this will help to correct the orientation of the image when the IP camera is hung
bottom-up by camera holder.
You can click both 'Vertical' and 'Horizontal' box at the same time.
Power Line Select the frequency of power line of the place you're using this IP camera.
Frequency This will help to reduce the flicker of certain lights in the image.
Condition Select the condition that you'll be using this IP camera from dropdown menu.
(AWB) - Auto: IP camera will adjust its parameters automatically.
- Night: You'll be using this IP camera in dark places where lights are
- Outdoor: Enable this condition on an IP camera for Outdoor installation.
- Tungsten:
TV out Click "Enable" box to enable its "VIDEO OUT" function for connections and
video sending to TV monitors or DVR's.
IR-cut An IR-cut filter is built in this IP camera to reduce the effect of IR lights (which
(Day / Night) will change the color of the image and make it look different than what you see
through your eye), and most of IR lights are coming from sunlight.
You can select the behavior of IR-cut filter:
‐
‐
‐
Day IR-cut filter will only be switched on when there's sunlight. You can define the
starting and ending time when IR-cut filter should be switched on by selecting
'Schedule' and define starting and ending time by dropdown menu.
WDR
Click to enable WDR feature on an IP camera. (It allows the IP camera to
compensate for intense lighting in the background to distinguish subjects in the
foreground and in the background).
When you finish with above settings, click 'Apply' button to save changes.
insufficient.
To be used for yellow/ orange lighting conditions.
Auto: IR filter will act automatically. If you are not sure that you should use
IR filter, select this option.
Always ON: IR filter is always on.
Always OFF: IR filter is always off.
39
DG-SC8860VPI User Manual