Digisol DG-SC8860VPI User Manual page 51

The description of every setup item is listed below:
Item
Enable Setting
Title
Motion Detection
Digital Input 1/
Digital Input 2
Enable Schedule
Time
Enable FTP
Enable EMAIL
Enable Samba
(Net Storage)
Enable SD CARD
Trigger digital
output for xx
second(s).
When you finish with above settings, click 'Apply' button to save changes.
Description
Check this box to enable this event. If you just want to disable this event
temporarily, you can uncheck this box to disable the event without deleting
it.
Input any description text for this event so you can identify it quickly. You
can use alphabets, numbers and symbols include:!$-.@^_~ (Note: no
spaces allowed).
Check this box and this event will be activated when one of motion
detection window detects motion.
Check this box and this event will be activated when digital input 1/digital
input 2 signal is high or low (select from dropdown list).
Check this box and this event will be activated when designated weekday
and time is reached.
You also have to check weekday box, and select time from dropdown list. If
you select 'Always' as time, this event will be activated during all the days.
Check this box and IP camera will save file on FTP server (refer to 'FTP
Server' setting in 'Event Server' tab) when this event is activated.
Check this box and IP camera will send an Email to designated recipient
address (refer to 'SMTP Server' setting in 'Event Server' tab) when this
event is activated.
Check this box and IP camera will save file on samba server (refer to
'Samba Server' setting in 'Event Server' tab) when this event is activated.
Check this box and IP camera will save file on SD card when this event is
activated. A working SD card must be inserted into IP camera in advance.
Check this box and IP camera will trigger digital out to 'high' state for xx
seconds when this event is activated, where 'xx' seconds must be defined
by the dropdown list.
51
DG-SC8860VPI User Manual