Digisol DG-SC8860VPI User Manual page 35

Here is the description of every setup item:
Item Description
Enable Filter Check this box to enable IP address filter, uncheck this box to disable this
function.
Accepted IP It lists all IP addresses that can build connections to this IP camera. If you want
list to remove a set of IP addresses from the list, click on the IP address and click
'Remove' button.
IP Address Input the starting and ending IP address of IP camera whose connections you
wish to accept. IP camera will only accept connections established from these IP
(Accepted IP
addresses.
list)
If you want to specify one IP address only, input the same IP address in both
fields.
Click 'New' button to add IP address into accepted IP list.
Deny IP list It lists all IP addresses that cannot build connections to this IP camera. If you
want to remove a set of IP addresses from the list, click on the IP address and
click 'Remove' button.
IP Address Input the starting and ending IP address of IP camera. The IP camera will deny
connections established from these IP addresses.
(Deny IP list)
If you want to specify one IP address only, input the same IP address in both
fields.
Click 'New' button to add IP address into deny IP list.
When you finish with above settings, click 'Apply' button to save changes.
35
DG-SC8860VPI User Manual