Digisol DG-SC8860VPI User Manual page 112

Ensure that your Android device is wirelessly connected to same wireless access point to which
the DIGISOL IP camera's are connected.
In this page, you can input IP camera's parameters manually:
Name: You can define a name for this IP camera for easy identification.
Host: Here, you need to enter an IP Address or a Domain name i.e. URL of an IP camera.
HTTP Port: Enter the HTTP port of an IP camera. Default port is 80 if any other port is used then
please enter that port.
RTSP Port: Enter the RTSP port of an IP camera. Default port is 554 if any other port is used then
please enter that port.
RTSP Path: It's taken by de
" /stream2" as per the image quality requirement.
Use r: Input the logi n username of IP camera. Default username is 'admin'
Password: Input the password of IP camera. Default password is 'admin'
Location: If you click on this field, it will open a window as shown below:
fault as "/mobile". You can modify the path as "/stream1" or
112
DG-SC8860VPI User Manual