Maintenance - Digisol DG-SC8860VPI User Manual

3-14 Maintenance

You can do some maintenance job about this IP camera here.
Here is the description of every setup item:
Item
Reboot
Reset
Backup
Backup to SD
card device
Restore
Restore from SD
card device
Upgrade
Description
Click this button to reboot the IP camera. This function is useful when you
find IP camera is not working properly.
Clear all settings of IP camera and reset to factory default setting.
Backup IP camera's setting and save it on your computer.
Backup IP camera's setting and save it on SD card. A SD card must be
inserted into SD card slot when you click this button, or you'll receive an
error message.
Restore a previously-saved configuration file saved on your computer. Click
'Browse' button to select a file on your computer first, then click 'Restore'
button.
Restore IP camera's configuration which is previously-saved on SD card.
Upgrade IP camera's firmware. Click 'Browse' button to select a firmware
image file on your computer first, then click 'Upgrade' button.
63
DG-SC8860VPI User Manual