Storing The Outboard Motor - TOHATSU MD 30B2 Owner's Manual

ENOM00691-0
EFO type
Lay the engine with the shift lever up.
ENOM00692-0

3. Storing the outboard motor

Keep the motor in a vertical position when
you store it.
ENON00618-0
Note
If you store the motor in a horizontal posi-
tion, lay the motor as shown in figure of last
page.
ENOM00693-0
EFO type
ENOW00069-0
WARNING
When taking outboard motor from package
or removing outboard motor from the boat,
never release the lock lever. If the lock
lever is released, it will very easy for the
clamp bracket to spring up to the tilting
direction because it is not fixed.
*Tie the clamp bracket to the outboard
with a rope.
*Pay attention to the tilting direction so as
not to be injured by the springing clamp
bracket.
REMOVING AND CARRYING THE OUTBOARD MOTOR
ENOF00680-0
1. Lock
2. Reverse lock lever
3. Clamp bracket
4. Rope
5. Tilting direction
ENOW00067-0
Do not go under outboard motor tilted up
even if it is supported by support bar, or
accidental fall of outboard motor could
lead to severe personal injury.
ENOW00068-0
Close air vent screw of fuel tank and fuel
cock before carrying or storing outboard
motor and fuel tank, or fuel may leak,
potentially catching fire.
1
2
3
4
ENOF00073-0
WARNING
WARNING
69
5