Working With Event Logs And Syslog Servers; Enabling Logging And Sending Event Logs To A Syslog Server - Ruckus Wireless SmartCell 8800-S User Manual

Working with Event Logs and Syslog Servers

Both the Maintenance > Support Info and Administration > Log pages can be used
to view the AP's current log file text. You can use the former to send the log to
Ruckus Wireless support or save it to a local file, and use the latter to configure
automatic delivery of log files to a syslog server.
Enabling Logging and Sending Event Logs to a Syslog
Server
If you have a syslog server on the network, you can configure the AP to send the
device logs to the server. Enable logging (if disabled) and configure the AP to send
logs to the syslog server.
1 Go to Administration > Log. The Administration > Log page appears.
Figure 55. The Administration > Log page
2 In Log Status, click Enabled.
3 After enabling logging, configure the following options:
• Syslog Server Address: To enable the AP to send messages to a syslog server
as they appear, enter the IP address of the syslog server.
• Syslog Server Port: By default, the syslog port number is 514. If the syslog
server is using a different port, enter that port number in this field.
4 Click Update Settings to save and apply your changes.
ZoneFlex Outdoor Access Point 100.0.0 User Guide, 800-70725-001 Rev B
Working with Event Logs and Syslog Servers

Enabling Logging and Sending Event Logs to a Syslog Server

133