RRP1.12 TRAY ASSY MSI (PL1.1.28)
Removal
1)
Open the COVER MSI (PL1.1.26) from the printer.
2)
Remove the COVER MSI. (RRP1.11)
3)
Check that the PLATE ASSY BOTTOM MSI is shifted down.
4)
Open the TRAY ASSY MSI, raise it pushing inward, and pull it out frontward.
Replacement
Replace the components in the reverse order of removal.
Chapter 3 Removal and Replacement Procedures
Figure: TRAY ASSY MSI Removal
3-135