Rrp9.2 Hsg Assy Bias (Pl9.1.4) - Minolta Magicolor 3100 Series Service Manual

RRP9.2 HSG ASSY BIAS (PL9.1.4)
Removal
1) Pull out the CASSETTE from the printer.
2) Remove the COVER TOP MAIN. (RRP1.4)
3) Remove the COVER ASSY FRONT HEAD. (RRP1.2)
4) Remove the COVER ASSY FRONT. (RRP1.13)
5) Remove the COVER ASSY FRONT IN. (RRP1.10)
6) Remove the COVER SIDE L. (RRP1.14)
7) Remove the LINK:L. (RRP1.7)
8) Remove 5 screws securing the HSG ASSY BIAS (PL9.1.4) to the left side surface of the printer.
9) Remove the HSG ASSY BIAS from the printer.
Replacement
Replace the components in the reverse order of removal.
3-224
Figure: HSG ASSY BIAS Removal