Rrp9.5 Actuator Regi (Pl9.1.9) - Minolta Magicolor 3100 Series Service Manual

RRP9.5 ACTUATOR REGI (PL9.1.9)
Removal
1) Remove the CHUTE ASSY REGI. (RRP9.3)
2) Holding the shielding portion of the ACTUATOR REGI from the CHUTE ASSY REGI (PL9.1.6), move
the ACTUATOR REGI leftward and extract the right shaft of the ACTUATOR REGI from the bearing of
the CHUTE ASSY REGI.
3) Pull out the ACTUATOR REGI from the CHUTE ASSY REGI together with the SPRING SENSOR
REGI (PL9.1.10).
4) Remove the SPRING SENSOR REGI from the ACTUATOR REGI.
Replacement
Replace the components in the reverse order of removal.
Chapter 3 Removal and Replacement Procedures
Figure: ACTUATOR REGI Removal
3-229