Test Print - Minolta Magicolor 3100 Series Service Manual

2.4 Test Print

Clicking the "TEST PRINT" button causes the following screen to be displayed.
Select the proper Input, Print Mode, Color Mode, Resolution, Image and number of sheets. Then click the
"Print Start" button, and the printing will start under those conditions. Parameter settings are as listed
below.
Setting items
Input
(Paper trays)
Print Mode
Color mode
Resolution
Image
(Print image)
Media
(Paper type)
Universal size
Printing setting
number of sheets
Tray1/Tray2/Tray3/MSI: Paper size set in each tray is detected
automatically and displayed. The status of each tray is also displayed.
Paper empty / Paper near empty / Upper Cassette Detached
If MSI is selected, select the paper size from the pull-down menu:
Monarch / Postcard / COM-10 / DL / Statement / A5 / C5 / B5 / Executive /
Letter / A4 / Legal13 / Legal14 / Universal size
Duplex / Simplex
Color / Black
(Note: The Black setting prints a color test page at 80% density)
1200 dpi / 600 dpi
None (blank sheet)/Test Print (built-in test pattern)
Set the type of paper: Plain paper-L / Thicker paper-L / Heavier paper-L /
Heavier paper-H / Envelope / Postcard / Transparency(=OHP)/ Label-H /
Plain paper-L High Gloss / Thicker paper-L High Gloss / Label-L / Heavier
paper-L Back Face / Heavier paper-H Back Face / Envelope Back Face /
Postcard Back Face / Plain paper-H / Thicker paper-H / Plain paper-H
High Gloss / Thicker paper-H High Gloss
This item becomes enabled if MSI is selected in the Input item and
Universal size is selected for paper size. Enter values for the paper Width
and Length.
Set the print count.
Chapter 2 Operation of Diagnostics
Description
2-103