Rack Mounting - ATEN kh2508a User Manual

Chapter 2. Hardware Setup

Rack Mounting

The KH2508 / KH2516 can be mounted in a 19" (1U) rack. The mounting
A A
brackets can screw into either the front or the back of the unit so that it can
attach to the front or the back of the rack. To rack mount the unit:
1. Remove the screws at the front or the rear, as shown in the diagram below.
Philips hex head
M3x6
Philips hex head
M3x6
2. Screw the mounting brackets into the sides of the unit at the front or the
rear, as shown in the diagram below.
Philips hex head
M3x8
Philips hex head
M3x8
3. Slide the unit into the front or rear of the rack and secure it to the rack.
13