KH2508
/ KH2516
A
A
Setting the Hotkey key combination
The keys used to enter the Hotkey Mode (see HOTKEY COMMAND MODE,
page 31) can be switched between:
[Num Lock] + [-]
by the following steps:
1. Invoke Hotkey mode:
[Num Lock] + [-] or [Ctrl] + [F12]
2. Press
.
[H]
After you press [H], the command line displays HOTKEY HAS BEEN
CHANGED for one second; then the message disappears and you
automatically exit Hotkey mode.
Setting the OSD Hotkey combination
The Hotkeys used to access the OSD (see OSD HOTKEY, page 30) can be
switched between
[Scroll Lock], [Scroll Lock], [Ctrl], [Ctrl],
and
[Alt], [Alt]
1. Invoke Hotkey mode:
[Num Lock] + [-] or [Ctrl] + [F12]
2. Press
.
[T]
After you press
[T]
CHANGED for one second; then the message disappears and you
automatically exit Hotkey mode.
48
User Manual
, and
[Ctrl] + [F12]
by the following steps:
, the command line displays HOTKEY HAS BEEN