Osd Configuration Backup/Restore; Backup - ATEN kh2508a User Manual

OSD Configuration Backup/Restore

The Firmware Management Utility lets you backup the current OSD
configuration of the KH2508
Storing the OSD configuration settings is useful when deploying more than one
installation that uses the same settings.

Backup

Follow these steps to store a backup file to a local computer:
1. Make sure your computer is connected to the KH2508
See Before You Begin, page 53, and follow steps 1–3.
2. When you have selected the F4 ADM function, scroll down to OSD
CONFIG BACKUP / RESTORE. Press [Enter], then press [Y] to invoke
OSD Config Backup / Restore mode.
3. Run the Firmware Management Utility. In the dialog box, choose OSD
Configuration Backup/Restore, then click Next.
4. In the window that appears, click Connect Device.
5. In the Password field, key in a password for the file.
Note: Setting a password is optional. If you do not set one, the file can be
restored without specifying a password.
6. Click Backup.
7. When the browser asks what you want to do with the file, select Save to
disk, then save it in a convenient location.
Chapter 7. The Firmware Upgrade Utility
/ KH2516 , and restore it when necessary.
A A
/ KH2516 .
A A
61