ATEN kh2508a User Manual page 67

required to be upgraded. After you have made your selection(s), click
Next to perform the upgrade.
Deselect
any firmware
not to be
upgraded
Select for
Firmware
Checking
6.
Check Firmware Version - when selected the utility compares the Main
Board and OSD firmware level with the upgrade files MAIN01 and
MAIN02. If the device versions are higher than the upgrade versions a
dialog box informs you and gives you the option to continue or cancel.
The firmware versions of the adapter cables are not checkd.
If you didn't enable Check Firmware Version, the utility installs the
upgrade files without checking whether they are a higher level, or not.
As the upgrade proceeds status messages appear in the Status
Messages panel, and the progress toward completion is shown on the
Progress bar.
To abort the upgrade procedure before it completes, click Cancel.
If you cancel before completion, a dialog box warns you that the
upgrade will not finish and shows the options to proceed or abort the
cancel operation. The Mainboard and OSD firmware may be missing or
corrupted upon rebooting the switch.
Chapter 7. The Firmware Upgrade Utility
57