Computer Controlled Compressed Air Unit
This integrated accessory provides dry, oil‐free compressed air to protect the
VersaLASER's optics and assist with cutting and etching of materials that tend to
flame up or produce heavy quantities of smoke or debris. It MUST be used in
conjunction with either the Air Assist Cone or AABS accessories. The Air Compressor
is designed to automatically power on when the VersaLASER starts a print job, and
then power off automatically and finishes it.
WARNING: The use of compressed air IS NOT intended to decrease maintenance of the VersaLASER.
Actually, it has been known to increase the frequency of cleaning maintenance due to debris being
blown around, inside the machine, during processing.
This device is not intended for continuous use (longer that 20 minute jobs), nor high‐humidity
environments, otherwise serious damage to the compressor may occur. If you need an air unit
capable of heavy duty use and/or high humidity environments, please contact our Sales Department.
Features
Size: 12"W x 6" D x 14"H / Weight: 14 lbs
Controlled through a USB port connected to the VersaLASER and is activated only when jobs are
in process
An air dryer is integrated into the unit to remove the moisture that can damage the optics.
Noise insulated for quiet operation.
Powder‐coated finish, durable construction.
Installation