ULS VersaLaser VL-200 Safety & Installation Instructions page 46

1. Focus Carriage
2. Thumbscrews (2)
3. Front Cover Plate (red)

Loosen the two thumbscrews completely. They are held captive by retaining clips so they
will not come out all the way.

Grasp the Front Cover Plate. Gently slide it forward and out of the Focus Carriage.

Inspect the #3 Mirror and focus lens and clean as necessary. Be sure to inspect the top and
bottom side of the Focus Lens.
1. #3 Mirror
2. Focus Lens