Adjustments; Tiller Angle; Seat Slide; Seat Swivel - Shoprider Torino S-778XLSBN User Manual

Adjustments

Tiller Angle Adjustment
On the left side of the tiller base is a red
lever. Push the lever in to release the pin
and select the required angle. Pull the lever
back out and ensure the pin is securely
located in one of the five adjustment holes.
Seat Slide Adjustment
Your Captain seat can move forward or
backwards similar to a car seat. Lift lever (1)
up and slide the seat to the required
position. Release the lever to lock it back in
place.
Seat Swivel adjustment
For easy transfers, the seat can be swivelled to the side. Lift the red lever (2) and
carefully rotate the seat to get on or off. Pulling up on this lever and the seat
simultaneously will allow the seat to be removed.
Always ensure the seat is locked in the forward facing position when in use.
DO NOT attempt to drive when swivelled as this may result in injury.
Seat Height Adjustments
First, remove the seat by pulling up on the red lever and lifting the seat
simultaneously. The seat height may be adjusted by undoing the handknob (3)
completely and removing the rear chassis cover (take care with the wiring looms
for the rear lights). Remove the locking pin and adjust the seat adapter to the
required height. Re-insert the locking pin fully and ensure the lock wire is in
place. Replace the rear chassis cover, re-tighten the handknob and replace the
seat.
2
5
Red Lever
1
3