Adjustments; Armrest Angle Adjustment; Seat Slide & Swivel Adjustment; Seat Removal - Shoprider TE-779XLS User Manual

Fig. 1
Seat Swivel
Lever
Fig. 3

4. ADJUSTMENTS

The Shoprider Scooter allows various adjustments to be made to suit the individuals
®
requirements:
Armrest Angle Adjustment (Fig. 1)
Flip up the armrests to allow access to the adjusting dial located under the armrest wind the
adjusting dial (Fig. 2) in a either clockwise or anti clock direction to adjust the armrest up or
down.
Do not use the scooter without the arms being fitted.
Seat Slide & Swivel Adjustment (Fig. 3)
Pulling up on the seat slide lever allows the seat position to be adjusted forward or backward.
Release the lever and the seat will lock in that position. Under the right side of the seat there
is a spring loaded red lever. Pulling up on the lever allows the seat to swivel, when released
the seat will lock into one of 3 positions.
Seat Removal (Fig. 4)
Fold down the back of the seat. Pull up the swivel seat adjustable lever (fig. 3) and lift seat
off.
Seat Height Adjustment (Fig. 4)
Remove seat as described above. Loosen seat tightening bolt by hex key wrench.
Remove the locking pin that secures the seat adaptor. Lift the seat adaptor out of the seat
post. The seat height can be adjusted to 3 different settings by inserting the steel locking pin
in the required hole. Retighten the bolt and replace the seat.
Shoprider Scooters User Guide
Adjustment
Seat Slide
Lever
dial
Seat Locking
Pin Adaptor
Fig. 2
Seat Seat Tightening
Bolt
Fig. 4
3