12- Error Reports And System Malfunctions - Adesys Octalarm-IP Manual

12- Error reports and system malfunctions

PSTN malfunction:
PSTN no network:
GSM malfunction:
GSM no network:
Mains supply failure: No mains power. The dialer automatically switches over to the
Battery almost empty: The dialer has had a mains supply failure and is continuing on
Battery malfunction:
ACC:
Sensorbus:
Octalarm-IP 100104E
PSTN module defect. If this happens regularly the appliance
should be repaired.
Telephone line is disconnected
GSM module defect
No GSM network found
emergency power supply
the battery however, the battery is almost empty
The battery is automatically tested once every two weeks. It is
now due for replacement
It is not possible to connect to the ACC. Causes: the ethernet
cable is disconnected, no access to the internet or the ACC is
temporarily unavailable
Short-circuit in Sensorbus. Check cabling.
53