Step 6: Configuring Inputs - Adesys Octalarm-IP Manual

Step 6: Configuring Inputs

06.Inputs
The following menus are offered when configuring
Inputs: A number of the fields that have to be filled in
depend on the choice that you have made previously.
name
1
input type external reset
Input contacts
1 First choose an Input. You can then give it a different name.
2 Use the F3 Options function key to add an Action List.
3 When an Input is configured as an external Reset key, the setting for this input will always
be NO (Normally Open) and a reset will therefore be carried out when the switch is closed.
4 It is only possible to record the location on the alarm dialer itself. This is not possible via the
ethernet.
3
open when idle (NO)
closed when idle (NC)
active when
reset when
connect via
action list
2
when status changes
alpha numeric message when active
voice message when active
alpha numeric message on reset
voice message on reset
secs. stable
secs. stable
directly
sensorbus
stop action list
finish action list
standard/recorded
4
standard/recorded
4
the
options play
(F3)
record
following
options play
(F3)
record
following