Step 1: Settings Acc (Optional) - Adesys Octalarm-IP Manual

Logging in: As an installer you log in with the 9999 pincode which enables you to enter and
change all settings.

Step 1: Settings ACC (optional)

01.Adesys Control Centre (ACC)
(only if the alarm is connected to the internet.)
You will be offered the following menus when connecting the Octalarm-IP to the ACC. A
number of the fields that have to be filled in depend on the choice that you have made
previously.
connection
1 If the installer's ACC code is entered (you can also leave it empty), it can "watch" with the
alarm and give remote support. The installer knows this code. Installers ask Adesys for this
code.
2 The alarm's serial number is asked for during the ACC log in procedure. This can be
protected with a password in order to prevent someone who enters a random serial number
from being able to operate the alarm. You can also leave it empty. The user/owner thinks of a
random password (numeric code of 4 numbers for example) and enters it here as well as in
the ACC later.
Octalarm-IP 100104E
none
connected installer's code
password
1
2
19