9- Logging In To The Alarm Via The Internet - Adesys Octalarm-IP Manual

9- Logging in to the alarm via the internet

If the alarm is connected to the internet and the installer's code and user password have been
entered, a connection can be made with the Octalarm-IP. This is done as follows:
As an installer on the PC
1. Go to the ACC website: http://www.meldcentrale.nl
2. Log in to your account using your e-mail address and password.
3. If you or the client have already entered your installer code in the dialer it will be
visible immediately. If this isn't the case you will have to ask your client to add you
as an installer to the installer's rights menu. The dialer will be visible after doing this.
As user on a PC
1. Go to the ACC website: http://www.meldcentrale.nl
2. Log in to your account using your e-mail address and password.
a.
3. Select the option "Add dialers" in the menu on the left.
4. You will now see a form where you can enter your serial number and password.
These are the numbers that you made a note of by the dialer. Enter the numbers
and press "Add".
5. The menu will now have an extra option: "My alarms" where you can view the status
of the dialer that you have just added.
6. Repeat these steps for any new alarms dialers.
7. If necessary, you can add or remove an installer by selecting installer's rights in the
option "My dialers".
8. If an installer code has already been entered in the dialer, you will be able to see the
installer concerned here.
9. You can allocate an installer to the dialer, or change the existing one, by entering an
installer code in the "Change installer" field.
Octalarm-IP 100104E
First make an account if you don't have one already. To do this select the
"new user" option and follow the instructions.
37