4- Front Panel - Adesys Octalarm-IP Manual

4- Front Panel

1 Function keys F1, F2 and F3
The three function keys below the display
are allocated specific functions depending
on the screen's content.
2 Cursor keys
The cursor keys enable you to navigate
through the different menus. Depending
on the page chosen, the OK key is used
to confirm choices and go to the following
page.
3 Loudspeaker
The loudspeaker is located behind the
grill on the right side of the front panel. It
is used for any local alarms.
12
4 Numeric keys
The numeric keys are used to enter
numbers and letters. This works in the
same way as a GSM telephone. For
example, in order to enter the 'b', the abc
key has to be pressed twice. Note that the
: character is entered with the * key when
entering times and that the # key serves
for capital letters.
5 Reset key
The Reset key is used to reset the alarm
after an alarm notification. The reset
function can also be allocated to one of
the inputs.
6 Test key
This is used for testing:
•
the alarm inputs
•
local alarms
•
recorded messages.
Octalarm-IP 100410E