Adesys Octalarm-IP Manual page 26

1 First choose a user/alarm receiver from the list or use the F5 Options function key to make a
new one or remove an old one.
2 By allocating a 'role' the receiver will be given specific authorisation. There are four possible
roles:
Only reset - For users that are only authorised for alarm procedures and can never change
settings. They can only reset active alarms and turn off inputs when service is required.
Assistant administrator - As above plus small changes to the alarm sequence. This is
sufficient for putting other people on the roster in the event of illness or holidays for example.
Administrator - As above plus complete adjusting of the alarms including adding or removing
people, altering call back/repeat times etc.
Important: also able to change peoples' 'roles'.
Installer - As above plus all detailed settings that are required for the installation. Most
installation dependent settings are made once and never changed again. An input is, for
example, "Normally open" (NO) and then always remains so.
3 The reason for the 'none' option in this menu is that it's not necessary for the installer to
receive messages when they still have to be included in the Telephone Book for example.