Display Messages - Yamaha montage6 Owner's Manual

LCD indication
** will be deleted.
** will be overwritten.
Activate the source controller to assign.
Advanced settings will be initialized.
All data and libraries will be initialized. Unsaved
user data will be lost.
All data is initialized upon power-on.
All settings will be initialized. User data is kept.
All sound will be stopped during optimization.
All user data will be initialized. Unsaved user data
will be lost.
Are you sure?
Audio Rec stopped due to lack of memory space. The USB flash memory device is full and no more audio recording data can be
Auto power off disabled.
Bulk data protected.
Can't process.
Completed.
Connecting to USB device...
Copy protected.
Current user data will be overwritten by **.
Data memory full.
Device number is off.
Device number mismatch.
File is not found.
File or folder already exists.
File or folder path is too long.
Folder is not empty.
Illegal bulk data.
Illegal file name.
Illegal file.
Keybank full.
Library full.
MIDI buffer full.
MIDI checksum error.
No data.
56
MONTAGE Owner's Manual

Display Messages

This message appears when the specified operation you are about to execute will
cause the specified data to be deleted.
This message appears when a file/folder having the same name as the one you
are about to save already exists.
You can assign the parameter to the controller you are about to activate.
All settings executed in [Advanced] tab will be initialized.
All data and libraries will be initialized. Unsaved user data will be lost.
All data is initialized upon power-on.
All settings will be initialized. User data is kept.
This message appears before the internal memory is restored. All sound will be
stopped during the optimization.
All user data will be initialized. Unsaved user data will be lost.
Confirms whether you want to execute a specified operation or not.
saved. Use a new USB flash memory device, or make space by erasing
unwanted data from the USB flash memory device.
This message appears before Auto Power Off is disabled.
Bulk data cannot be received because of the setting.
The MONTAGE cannot process a requested operation.
The specified load, save, format, or other Job has been completed.
Currently recognizing the USB flash memory device connected to the [USB TO
DEVICE] terminal.
You have attempted to export or save a copy-protected digital audio source.
This message appears when saving a file, and user data under that name already
exists.
The internal memory is full, preventing storing of the recorded data in the Library.
Bulk data cannot be transmitted/received since the device number is off.
Bulk data cannot be transmitted/received since the device numbers do not
match.
The specified file was not found during a Load operation.
A file/folder having the same name as the one you are about to save already
exists.
The file or folder you tried to access cannot be accessed because the maximum
amount of characters indicating the path has been exceeded.
You have attempted to delete a folder that contains data.
An error occurred while receiving a Bulk data or Bulk Request message.
The specified file name is invalid. Try entering a different name.
The specified file is unusable by this synthesizer or cannot be loaded.
The maximum overall number of Key Banks has been exceeded when executing
a Load operation.
The maximum overall number of Libraries has been exceeded when executing
the related operations.
Failed to process the MIDI data because too much data was received at one time.
An error occurred when receiving bulk data.
This message appears when the selected track or range contains no data. Select
an appropriate track or range.
Description