Appendix; Shift Function List; Display Messages - Yamaha MX49 Owner's Manual

Appendix

Shift Function List

Some of the important functions and operations on the instrument can be executed with convenient panel control
shortcuts. Simply hold down the [SHIFT] button and press the indicated button (as described below).
Operation
[SHIFT] + [INC]/[DEC]/[DATA] dial
[SHIFT] + [SPLIT]
[SHIFT] + [LAYER]
[SHIFT] + [EXIT]
[SHIFT] + [SELECT]
[SHIFT] + [KNOB FUNCTION]
[SHIFT] + [PART 1-2 LINK]
[SHIFT] + [ARP]
[SHIFT] + desired Category button

Display Messages

LCD indication
All remote templates stored.
Are you sure?
Auto power off disabled.
Bulk protected.
Clear edit Voice?
Completed.
Connecting USB device . . .
Device number is off.
Device number mismatch.
Executing . . .
FactorySet . . .
File already exists.
File not found.
Illegal file name.
Increases/decreases the value by 10. (Program number in the Play mode; parameter
value in the Edit mode)
In the Performance Select display, this switches among the Performance groups.
In the Performance top display, this replaces Part 1 with Part 2 (Invert function).
In the Performance top display, this copies a selected Part (Part 1 or Part 2) to the
other Part (Unison function).
Calls up the Performance top display.
Resets Performance 1 to the factory settings, and calls up the top display of
Performance 1 (Quick Reset function).
Instantly resets Knobs [A] – [D] to Function 1.
Resets [PART 1-2 LINK] to on.
Calls up the Arpeggio display of Performance Part Edit.
In the Performance top display, this instantly calls up the Voice in the next Sub
Category of the selected Category. Perform this operation with the same Category
button repeatedly to select the subsequent Sub Categories.
In the Performance Select display, this selects the corresponding Performance
among Performances 1 – 16 in the selected Performance group.
NOTE
For details about Sub Categories, see the "DATA LIST" PDF document
Appears when you store the Control Template in the Remote mode.
Confirms whether you want to execute a specified operation or not.
Appears when Auto Power Off is disabled (by simultaneously holding down the lowest key on the
keyboard and turning the power on).
Bulk data cannot be received because of the Utility setting.
Appears when executing Performance Store while modifying but not yet having stored a Voice.
Make sure to confirm whether the edited Voice data should be erased or not.
The specified load, save, format, or other Job has been completed.
Currently recognizing the USB flash memory connected to the USB [TO DEVICE] terminal.
Bulk data cannot be transmitted/received since the device number is off.
Bulk data cannot be transmitted/received since the device numbers don't match.
A Format operation or Job is being executed. Please wait.
The Factory Set operation is automatically being executed when you turn the power on.
A file having the same name as the one you are about to save already exists.
The file of the specified type cannot be found.
The specified file name is invalid. Try entering a different name.
Function
Description
MX49/MX61 Owner's Manual
39