Yamaha montage6 Owner's Manual page 41

Switching Performances stored in a Live Set
by using the footswitch
You can switch the Performances by using a
connected footswitch (FC4 or FC5). The setting for this
operation is as follows.
1
Connect the footswitch (FC4 or FC5) to
the FOOT SWITCH [ASSIGNABLE] jack.
2
Press the [UTILITY] button to call up the
Utility display, and then touch [Settings]

tab [MIDI I/O] tab at the left side of the
screen.
3
Set "FS Assign" to "Live Set +" or "Live
Set -."
When "Live Set +" is selected, the Performances
are switched in forward order. When "Live Set -" is
selected, the Performances are switched in reverse
order.
Quick Guide — Creating Your Own Live Sets
MONTAGE Owner's Manual
31