Switching A Part On/Off - Yamaha montage6 Owner's Manual

Switching a Part on/off

You can turn the eight Parts of the current Performance on or
off as desired.
Turning specific Parts on/off (Mute
function)
You can turn individual Parts on/off by using the Mute
function.
1
2
1
Press the [PERFORMANCE CONTROL]
button.
The button lamp lights, indicating that each Part can be
turned on/off.
2
Press any of the Number A [9] – [16] buttons.
The corresponding buttons [1] – [8] of the
pressed button will light dimly and the Part
will be muted.
Press the same button again to turn the button on and
disengage the mute function for that Part. You can turn
multiple Parts on/off by pressing their buttons.
You can also mute parts by using the [PART CONTROL]
button with the operation below.
1
Press the [PART CONTROL] button.
2
Press the [MUTE] button to turn the button
on.
Among the Number A [1] – [16] buttons, only the buttons
whose corresponding Parts have sounds assigned to
them will light.
3, 4
3
Press the desired Number A [1] – [16] button
to mute the corresponding Part. The pressed
button will change from fully lit to dimly lit.
You can turn multiple Parts on/off by pressing multiple
buttons.
1
2
4
Press any of the dimly lit Number A [1] – [16]
buttons. The pressed button will fully light
again and the Mute function for that Part will
be disengaged.
Soloing a specific Part
The Solo function is the opposite of Mute, and lets you
instantly solo a specific Part and mute all others.
1
1
Press the [PERFORMANCE CONTROL]
button.
2
Press the [SOLO] button.
The [SOLO] button lights, indicating that Solo is enabled.
3
Press any of the Number A [1] – [8] / [9] – [16]
buttons.
The pressed button will light and only the corresponding
Part among the Parts 1 – 8 will be sounded. (The
Number A [1] – [8] and [9] – [16] buttons work in
conjunction with each other.)
You can also solo a part by using the [PART CONTROL]
button with the operation below.
1
Press the [PART CONTROL] button.
2
Press the [SOLO] button to turn the button on.
Among the Number A [1] – [16] buttons, only the buttons
whose corresponding Parts have sounds assigned to
them will light dimly.
3
Press any of the Number A [1] – [16] buttons
to solo the corresponding Part. The pressed
button will change from being dimly lit to fully
lit.
You can change the solo Part by pressing any other
Number button.
4
Press the [MUTE] button to disengage the
Solo function.
Quick Guide — Playing the Keyboard
3 2
1 3
4 2
MONTAGE Owner's Manual
23