Playback Audition Phrase - Yamaha montage6 Owner's Manual

Selecting an Initialized Performance
Follow the steps below to select an Initialized Performance.
1
Touch [Init] of the main category in the
Category Search display.
2
Only initialized Performances are
displayed in the Performance list.
The Initialized Performances are divided into three
categories: [Initialized Perform] for the normal Parts
(AWM2), [Initialized FM] for the normal Parts (FM-
X), and [Initialized Drum] for the Drum Parts.
3
Select the desired Performance.
Selecting only Single Part Performances
You can filter out the Single Part Performances by using
the Attribute function.
1
Touch [Attribute] in the Category Search
display.
2
Touch [Single] from the menu in the left
of the screen.
3
Only Single Part Performances are
displayed in the Performance list, letting
you select the desired one.
Quick Guide — Selecting Performances

Playback Audition phrase

You can hear a sample of Performance sounds. The sample
sound is referred to as "Audition phrase."
1
Touch [Audition] in the Category Search
display.
The sample of the currently selected Performance plays.
[Audition]
If you select a different Performance during Audition
phrase playback, the audition phrase switches to that of
the newly selected Performance.
2
Touch [Audition] again to stop playback.
NOTE
• You can also playback/stop the Audition phrase by pressing
the [AUDITION] button on the front panel.
• You can playback/stop the Audition phrase by pressing the
[AUDITION] button on the front panel while the Performance
display or the Live Set display is shown.
21
MONTAGE Owner's Manual