Using The Super Knob To Change The Sound; Mixing - Yamaha montage6 Owner's Manual

Quick Guide — Playing the Keyboard
Using the Super Knob to change
the sound
The Super Knob lets you simultaneously control all
parameter values of the functions assigned to Knobs 1 – 8.
You can create complex sounds by using the Super Knob
together with the Motion Sequencer.
The Super Knob is always available for use. You don't have
to press the Knob function button or the Knob Assign button
before using the Super Knob.
This section covers the procedure to check the parameter
values changed by the operation of the Super Knob.
1
Press the PART [COMMON] button.
The button lights, indicating that you can make common
settings for all Parts.
2
Press the Knob Assign [ASSIGN] button to
make the button light.
The functions currently assigned to Knobs 1 – 8 and the
parameter values are shown.
3
Turn the Super Knob while playing the
keyboard.
All relevant parameter values simultaneously change
and all assigned functions are applied to the sound.
NOTE
For details about the Knob assignment and the Super Knob
setting, see the Reference Manual PDF document.
Controlling the Super Knob by using a foot
controller
You can control the Super Knob by using a foot
controller (FC7).
1
Connect the foot controller (FC7) to the
FOOT CONTROLLER [1]/[2] jack.
2
Move the cursor to the Performance
name on the Performance Play display
and then press the [EDIT] button.
3
Touch the [Control] tab in the left of the

screen [Control Number] tab.
4
Set "Foot Ctrl 1" or "Foot Ctrl 2" to
"Super Knob"—depending on which jack
you connected the foot controller (FC7).
28
MONTAGE Owner's Manual

Mixing

Each Mixing can contain up to 16 Parts and a separate
Mixing can be created for each Part. You can adjust the
various mixing related parameters for each Part: volume,
pan, etc.
Basic procedure for Mixing
1
Touch the [Mixing] tab on the left side of the
Performance Play display.
The Mixing display appears.
2
4
5
6
1
Main category for each Part
2
Switching displays between 3-band EQ / 2-band EQ
3
EQ setting for each Part
4
Parameter values for each Part
5
Changing the display for Parts 1 – 16
6
Changing the display for the audio Parts (Parts 9 – 16
are not displayed)
2
Press the [PART CONTROL] button
Number A [1] – [16] buttons to select the
desired Part for which you want to adjust the
parameter values.
NOTE
By touching [Audio] (6) on the screen, the audio Part are
shown. You can set the parameters relating to the audio data
(AD Part) input from the A/D INPUT [L/MONO]/[R] jack and the
audio data (Digital Part)* input from the [USB TO HOST]
terminal.
*The audio data which is set as "Digital L/R" among device ports
3
Move the cursor to the parameters for each
Part and change the parameter values by
turning the Data dial.
NOTE
• For more detailed parameter settings, press the [EDIT] button
in the Mixing display to open the Edit display.
• For details about the Mixing parameters and Mixing Edit, see
the Reference Manual PDF document.
1 3
