Yamaha montage6 Owner's Manual page 62

Using a Connected Computer
Song playback from a computer using
the MONTAGE as a tone generator
The instructions below show how to use this instrument as a
MIDI tone generator. In this case, actual MIDI sequence data
is transmitted from DAW software on the computer, letting
you take advantage of the dynamic sounds of the
MONTAGE, while giving you the added benefit of saving
processing power on your computer by avoiding the use of
software synths.
Setting up the MONTAGE
1
Select the Performance to be edited.
2
Touch the [Mixing] tab on the Performance
Play display to call up the Mixing display.
3
Set up the Mixing for Parts 1 – 16 as
necessary.
Setting up the DAW software
1
Set the MIDI output port of the Tracks for
playing the MONTAGE to Port 1 of the
MONTAGE.
2
Enter the MIDI data to each Track of the DAW
software on the computer.
The tone generator settings of the part corresponding to
the MIDI Track will be set in the Mixing display on the
MONTAGE.
52
MONTAGE Owner's Manual