Playing An Audio File - Yamaha montage6 Owner's Manual

Recording and Playback
6
Press the [R] (Play) button.
If you have set the trigger level to "manual," recording
will begin immediately right after you press the [R] (Play)
button. While the recording, the [I] (Record) button will
light red and the [R] (Play) button will light green. If you
have set a value between 1 and 127 as the trigger level,
the recording will begin automatically whenever the
playback volume exceeds that level.
7
Play the keyboard.
If you set the trigger level to a value between 1 and 127,
recording will begin automatically whenever the
playback volume exceeds that level.
8
When you have finished playing, press the
[J] (Stop) button.
The recorded audio file will be saved on the selected
device.
42
MONTAGE Owner's Manual

Playing an audio file

As described below, the MONTAGE can play audio files
(.wav) from a USB flash memory device, regardless of
whether they have been created by the instrument itself or
come from another source.
1
Connect a USB flash memory device to the
[USB TO DEVICE] terminal of the MONTAGE.
2
Touch the [Play/Rec] tab
left side of the Performance display.
3
Touch "Audio Name" and then select [Load]
menu at the left side of the screen.
4
Select the source USB flash memory device
and folder.
5
Select the desired file (.wav) on the USB flash
memory device to execute the Load
operation.
1
1 Audio name
2 Audio volume
3 Audio length
6
Press the [R] (Play) button.
The audio file will begin playing.
7
Move the cursor to "Audio Volume" (2), and
then adjust the playback volume by using the
data dial.
8
Press the [J] (Stop) button to stop playback.
NOTE
Keep in mind that you can also play a selected Performance on
the keyboard during audio playback.

[Audio] tab at the
2
3