Yamaha montage6 Owner's Manual page 72

Troubleshooting
 Check the Arpeggio Switch parameter.
If this parameter for the current Part is set to off, Arpeggio playback will not be triggered by your keyboard performance even
if the [ARP ON/OFF] button is turned on.
[PERFORMANCE]  Part selection  "Arp On"
Cannot stop the Arpeggio.
 When Arpeggio playback does not stop even if you release the key, set the Arpeggio Hold parameter to "off."
[EDIT]  Part selection  ELEMENT/OPERATOR [COMMON]  [Arpeggio]  [Common]  "Hold"
The Song cannot be started even when pressing the [R] (Play) button.
 Does the selected Song actually contain data?
Song cannot be recorded.
 Is there enough free memory for recording?
MONTAGE memory can record up to 64 Songs. If the memory becomes full, no more recording is possible.
Data communication between the computer and the MONTAGE does not work properly.
 Check whether the Port settings on the computer are appropriate or not.
 Check whether or not the MIDI IN/OUT parameter is set to the appropriate value.
[UTILITY]  [Settings]  [MIDI I/O]  MIDI "MIDI IN/OUT"
MIDI bulk data transmission/reception does not work properly.
 Is the Receive Bulk parameter set to off?
Set the Receive Bulk parameter to on.
[UTILITY]  [Settings]  [Advanced]  MIDI "Receive Bulk"
 When receiving MIDI bulk data transmitted via the Bulk Dump function and recorded to the external MIDI device, you need to
set the MIDI Device Number to the same value as when transmitting.
[UTILITY]  [Settings]  [Advanced]  MIDI "Device Number"
When transmission does not work properly, is the device number of the MIDI instrument connected to the MONTAGE set to
match the Device Number parameter?
[UTILITY]  [Settings]  [Advanced]  MIDI "Device Number"
Cannot save data to the external USB flash memory device.
 Is the USB flash memory device being used write protected? (Write-protect should be set to off for saving data.)
 Is there enough free space on the USB flash memory device?
In the Contents display, set the device to the USB flash memory device. Check the amount of currently available (unused)
memory of the USB flash memory device indicated at the right top of the display.
[UTILITY]  [Contents]  [Load]/[Store/Save]
 Is operation of the particular USB flash memory device guaranteed by Yamaha?
For details, see page 54.
In the display, there are some black points (unlit) or white points (always lit).
 These are the result of defective pixels and occasionally occur in LCDs; they do not indicate a problem in operation.
62
MONTAGE Owner's Manual