Device; Emulation Type [Auto] - Pixelink PPC15-CX Instruction Manual

PPCxx-CX Series Flat Panel PC

Device ##

The Device## field lists the USB devices that are connected to the system.

Emulation Type [Auto]

Use the Emulation Type BIOS option to specify the type of emulation BIOS has to
provide for the USB device.
NOTE:
Please note that the device's formatted type and the emulation type
provided by the BIOS must match for a device to boot properly. If both
types do not match then device's behavior is undefined. To make sure both
types match, format the device using BIOS INT13h calls after selecting the
proper emulation option in BIOS setup. The FORMAT utility provided by
Microsoft® MS-DOS®, Microsoft® Windows® 95, and Microsoft®
Windows® 98 can be used for this purpose.
Auto
Floppy
Forced FDD
Hard Disk
BIOS auto-detects the current USB.
D
EFAULT
The USB device will be emulated as a floppy drive.
The device can be either A: or B: responding to
INT13h calls that return DL = 0 or DL = 1
respectively.
Allows a hard disk image to be connected as a
floppy image. This option works only for drives
formatted with FAT12, FAT16 or FAT32.
Allows the USB device to be emulated as hard disk
responding to INT13h calls that return DL values of
Page 95