Addon Rom Display Mode [Force Bios]; Bootup Num-Lock [On]; Pxe Remote Boot [Disabled] - Pixelink PPC15-CX Instruction Manual

PPCxx-CX Series Flat Panel PC

AddOn ROM Display Mode [Force BIOS]

Use the AddOn ROM Display Mode option to allow add-on ROM (read-only memory)
messages to be displayed.
Force BIOS
Keep Current

Bootup Num-Lock [On]

Use the Bootup Num-Lock BIOS option to specify if the number lock setting must be
modified during boot up.
Off
On D
EFAULT

PXE Remote Boot [Disabled]

The PXE Remote Boot option enables or disables the on-board LAN ROM function.
Disabled
Enabled
The system forces third party BIOS to display
D
EFAULT
during system boot.
The system displays normal information during
system boot.
Does not enable the keyboard Number Lock automatically. To
use the 10-keys on the keyboard, press the Number Lock key
located on the upper left-hand corner of the 10-key pad. The
Number Lock LED on the keyboard lights up when the Number
Lock is engaged.
Allows the Number Lock on the keyboard to be enabled
automatically when the computer system boots up. This allows
the immediate use of the 10-key numeric keypad located on
the right side of the keyboard. To confirm this, the Number
Lock LED light on the keyboard is lit.
The ROM function is disabled.
D
EFAULT
The ROM function is enabled.
Page 101